Toilet Repair & Replacement in Tampa

A constantly running toilet is usually wasting hundreds of gallons of water a day, driving up your water bill. This is typically caused by one of three minor issues inside the tank:

• Worn-out flapper: The rubber seal at the bottom of the tank degrades over time and allows water to constantly leak into the bowl. 

• Incorrect chain length: If the flush chain is too tight, it keeps the flapper propped open; if it is too lose, it can get caught underneath the flapper. 

• Misadjusted float height: If the water level inside the tank is set too high, water will continuously pour into the overflow tube. 

• If you’ve tried adjusting the tank and it still won’t stop running, contact us to rebuild the inner tank components for a permanent fix. 

Older “low-flow” toilets (especially those built in the 1990s) simply didn’t have the design engineering to push waste through with less water. However, if a modern toilet is constantly clogging, it usually means:

• A partial obstruction: An object (like a toy, heavy paper towel, or wet wipe) is trapped deep inside the toilet trapway where a plunger can’t reach. 

• Mineral buildup: Hard water scale can clog the tiny jet holes under the rim of your toilet bowl, weakening the power of the flush. 

• We can clear any deep obstructions safely. If your toilet is just old and inefficient, we can recommend and install a modern, high-efficiency model with maximum flushing power that won’t clog. 

A dripping faucet is usually caused by worn-out internal parts like O-rings, washers, or the ceramic cartridge. Whether we repair or replace it depends on a few factors: 

• When to repair: If your faucet is relatively new, high-quality, or matches your bathroom decor perfectly, a quick rebuild or cartridge replacement is highly cost effective. 

• When to replace: If the faucet is corroded, over 10 years old, or the finish is peeling, replacing it with a brand-new fixture is often a better long-term investment. 

• You supply the faucet you love, or you can choose from our stock of reliable fixtures – either way, we will ensure a flawless, leak-free installation. 

Yes, absolutely. Many homeowners love picking out their own custom finishes, styles, and smart toilets from local stores or online retailers. 

• What we do: Our licensed team will handle the professional assembly, secure mounting, line connections, and testing to ensure it complies with local plumbing codes. 

• Our recommendation: Just make sure all the necessary parts, supply lines, and valves are in the box before your appointment so we can complete the installation in a single visit.

If the low pressure is only happening at one specific faucet, the issue is localized to that fixture rather than your main water line. The most common culprits are:

• A clogged aerator: The small mesh screen at the tip of your faucet can easily trap sediment, rust particles, and hard water minerals, blocking the flow. 

• A failing cartridge: Debris can get trapped inside the faucet’s internal cartridge valves, restricting water movement. 

• Try unscrewing the aerator at the tip of the faucet and rinsing it out. If that doesn’t restore your water pressure, give us a call to inspect and clear the internal components.